Panasonic DMC-TS4 User Manual
Page 191
- 191 -
Others
[Memory card error.
This card cannot be used in this camera.
Format this card?]
•
It is a format that cannot be used with this unit.
> Insert a different card.
> Format the card again with the camera after saving necessary data on a PC etc.
Data will be deleted.
[Please turn camera off and then on again]/[System Error]
•
This message will be displayed when the lens did not operate properly.
> Turn the camera off and on. If the message persists, contact the dealer or your nearest
Service Center.
[Memory Card Error]/[Memory card parameter error]/[This memory card cannot be
used]
> Use a card compatible with this unit.
–
SD Memory Card (8 MB to 2 GB)
–
SDHC Memory Card (4 GB to 32 GB)
–
SDXC Memory Card (48 GB, 64 GB)
[Insert SD card again]/[Try another card]
•
An error has occurred accessing the card.
> Insert the card again.
> Insert a different card.
[Read Error/Write Error
Please check the card]
•
It has failed to read or write data.
> Remove the card after turning the power off. Insert the card again, turn the power on, and
try to read or write the data again.
•
The card may be broken.
> Insert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the
card]
•
Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures.
•
In the event that it stops even after using a “Class 4” card or higher, the data writing speed has
deteriorated so it is recommended to make a backup and then format
.
•
Depending on the type of the card, Motion Picture Recording may stop in the middle.