Panasonic DMC-TS4 User Manual
Page 158
Connecting to other equipment
- 158 -
∫ Other linked operations
Turning the power off:
If you use the remote control for the TV to turn off the power, the power on this unit also
turns off.
Automatic input switching:
•
If you connect with an HDMI micro cable and then turn on the power on this unit, and then
press [(], the input channel on the TV automatically switches to this unit’s screen. If the TV’s
power is in standby status, it will turn on automatically (if [Set] has been selected for the TV’s
[Power on link] setting).
•
Depending on the HDMI terminal on the TV, the input channel may not switch automatically. In
this case, use the remote control for the TV to switch the input channel. (For details on how to
switch input, please read the operating instructions for the TV.)
•
If VIERA Link does not work properly, refer to
Note
•
If you are unsure whether or not the TV you are using are compatible with VIERA Link, read the
operating instructions for the TV.
•
Available linked operations between this unit and a Panasonic TV is different depending on the
types of Panasonic TVs, even if they are compatible with VIERA Link. Refer to the operating
instructions of the TV for the operations that support on the TV.
•
Operation is not possible with a cable that is not based on the HDMI standard.
Always use a genuine Panasonic HDMI micro cable (RP-CHEU15: optional).
Part number: RP-CHEU15 (1.5 m) (5 feet)