Panasonic DMC-TS4 User Manual
Page 117
- 117 -
GPS/Sensor
∫ When positioning is taking a long time
Under the following conditions, successful positioning may take 2 to 3 minutes even when
reception is good.
•
When positioning is performed for the first time
•
When reception has been poor for a significant time
•
After changing the battery
•
When the camera has been left for a significant time without being turned on
•
When the camera has been moved a long way from the last location of successful reception
•
When [GPS Setting] is set to [OFF]
•
When [Airplane Mode] is set to [ON] and the power is turned off
∫ Displayed location name information
•
Country/region
•
Prefecture/state
•
City/ward/county
•
Town/village
•
Landmark
•
Latitude/longitude (displayed by pressing [DISP.] several times to switch among the
environment information screen)
The location name information and latitude/longitude displayed on success of the
positioning are recorded in the recorded still pictures and motion pictures
¢
.
For images containing such information, [
] is displayed at playback.
¢ Information can only be recorded when recording using [MP4] or [GFS]/[GS] in [AVCHD].
Note that only the information measured at the start of the recording is recorded.
Valid information for the current position is displayed as location name information by
searching the location names and landmarks in the database in this unit based on the
latitude/longitude from the positioning. (It may not display the closest location.)
•
[---] is displayed when there is no valid information even when the positioning is successful.
•
Even when the location name information is displayed as [---], it may be possible to select the
location name information with [GPS Area Select]
.
•
Desired landmark may not be registered. Location name information is as of
December 2011
.
For details of the types of landmark, refer to
•
Location name information (location names or landmark names) may be different from the
official names.