Panasonic DMC-TS4 User Manual
Page 203
- 203 -
Others
•
Press [MENU/SET] after viewing the last screen (12/12). For details, refer to
> Press [MENU/SET], select the [Setup] menu icon [ ]. Then press [MENU/SET], and then
select the [~] icon to set the desired language.
•
AF Assist Lamp will turn on white in the dark place to assist the focusing.
•
Is [AF Assist Lamp] on the [Rec] menu set to [ON]?
•
The AF Assist Lamp does not turn on in bright places.
•
The surface of the camera may become warm during use. This does not affect the performance
or quality of the camera.
•
Have foreign objects become trapped?
> Remove the foreign objects.
•
When closing, do not set the [LOCK] switch to the locked side. Doing so may cause damage or
leaks.
> Release the lock.
•
If the camera is used in cold places such as ski resorts or places at high altitude with the snow
or water droplets adhered to the camera, some parts of the camera may become hard to move
with snow or water droplets freezing in the gap of the zoom button or the camera [ON/OFF]
button. This is not a malfunction. When the camera returns to normal temperature it will
function as normal.
•
When using the camera in a place with sand or dust, some parts of the camera may become
hard to move with foreign objects getting in the gap of the zoom button, or the camera [ON/
OFF] button. Either clean with the supplied brush or wash off with fresh water.
•
Below cases are not malfunctions, so you can use the camera as normal.
> You hear a “rattling” sound when the camera is shaken while the power is off or during
Playback Mode (this is the sound of the lens moving).
> When power is turned on or off, or when switching from recording to Playback Mode, there
is a rattling noise (this is the sound of the lens moving).
> When zooming, you can feel some vibration (this is caused by the lens moving).
Others
[Requirements for Underwater use] is displayed repeatedly whenever the power
is turned on.
An unreadable language was selected by mistake.
A white lamp sometimes turns on when the shutter button is pressed halfway.
The AF Assist Lamp does not turn on.
The camera becomes warm.
The side door will not close.
A part of the camera such as the zoom button and side door does not move.
The camera makes a rattling sound or you can feel some vibration.