Panasonic DMC-TS4 - Manual (Page 170)

Connecting to other equipment
- 170 -
Selecting a single picture and printing it
Press 2/1 to select the picture and then press
[MENU/SET].
Press 3 to select [Print start] and then press
[MENU/SET].
• Refer to P171 for the items that can be set before starting to print
the pictures.
• Disconnect the USB connection cable after printing.
Selecting multiple pictures and printing them
Press 3.
Press 3/4 to select an item and then press [MENU/SET].
Item Description of settings
[Multi Select]
Multiple pictures are printed at one time.
• Press 3/4/2/1 to select the pictures, and then press [DISP.]. (When
[DISP.] is pressed again, the setting is canceled.)
• After the pictures have been selected, press [MENU/SET].
[Select All] Prints all the stored pictures.
[Print Set (DPOF)] Prints the pictures set in [Print Set] only. (P150)
[Favorite] Prints the pictures set as favorites only. (P149)
Press 3 to select [Print start] and then press [MENU/SET].
• If the print check screen has appeared, select [Yes], and print the pictures.
• Refer to P171 for the items which can be set before starting to print the pictures.
• Disconnect the USB connection cable after printing.
PictBridge PictBridge PictBridge
100 100 0001 0001 100 0001 _ _
1/11 1/11 1/11
Multi Print Multi Print Multi Print
Select Select Print Print Select Print
㪉
OFF
1
Print start
Print with Date
Num.of prints
Paper Size
Page Layout
Single Select
Set Select Cancel