Changing the clock setting – Panasonic DMC-TS4 User Manual
Page 28
Preparation
- 28 -
Press [MENU/SET].
•
Confirmation screen is displayed. Press [MENU/SET].
Select [Yes] to automatically correct the clock, and then press
[MENU/SET].
•
Message screen is displayed. Press [MENU/SET].
Press
2/1 to select the home area, and
then press [MENU/SET].
•
Confirmation screen to operate the altimeter,
barometer and compass is displayed. Select [Yes] to
operate them.
Select [Clock Set] in the [Rec] or [Setup] menu, and press [MENU/SET].
•
The clock can be reset as shown in steps
5
and
6
.
•
The clock setting is maintained for 3 months using the built-in clock battery even
without the battery. (Leave the charged battery in the unit for 24 hours to charge the
built-in battery.)
Note
•
If the clock is not set, the correct date cannot be printed when you order a photo studio to print
the picture, or when you stamp the date on the pictures with [Date Stamp]
or [Text
Stamp]
•
If the clock is set, the correct date can be printed even if the date is not displayed on the screen
of the camera.
•
When [GPS Setting] is set to [ON], the GPS function will operate even when the power is
turned off. Electromagnetic waves, etc. from this unit may affect other electronic
devices, so set [GPS Setting] to [OFF] or [Airplane Mode] to [ON] and turn the unit off
when you carry this unit onboard an airplane or inside a hospital, etc.
Changing the clock setting