Red-eye removal, Stabilizer, P109) – Panasonic DMC-TS4 User Manual

Page 109

Advertising
background image

- 109 -

Recording

Applicable modes:

When Red-Eye Reduction ([

], [

]) is selected, Digital Red-Eye Correction is

performed whenever the flash is used. The camera automatically detects red-eye and
corrects the picture.

Settings: [ON]/[OFF]

Note

Only available when [AF Mode] is set to [š] and Face Detection is active.

Under certain circumstances, red-eye cannot be corrected.

Applicable modes:
Using this mode, jitter during picture taking is detected, and the camera automatically
compensates for the jitter, enabling jitter-free images to be taken.
When recording motion pictures, “Active Mode” (stabilizer for motion pictures) will
automatically function. This decreases the jitter of the image when recording motion
pictures while walking, etc.

Settings: [ON]/[OFF]

Note

Stabilizer is fixed to [OFF] in [Panorama Shot] in Scene Mode.

The setting is fixed to [ON] in [Handheld Night Shot] in Scene Mode.

During motion picture recording, this setting is fixed to [ON] and “Active Mode” works.
Note that “Active Mode” does not work when [Rec Quality] is set to [VGA] in [MP4].

In “Active Mode”, stronger effect of the correction can be achieved at the wide end.

The stabilizer function may not be effective in the following cases.
Be careful of camera jitter when you press the shutter button.

When there is a lot of jitter.

When the zoom magnification is high.

In Digital Zoom range.

When taking pictures while following a moving subject.

When the shutter speed becomes slower to take pictures indoors or in dark places.

[Red-Eye Removal]

[Stabilizer]

Advertising