Panasonic DMC-TS4 - Manual (Page 198)

Others
- 198 -
• This phenomenon appears when you press the shutter button halfway to set the aperture value
and does not affect the recorded pictures.
• This phenomenon also appears when the brightness changes when the camera is zoomed or
when the camera is moved. This is because of operation of the automatic aperture of the
camera, and it is not a malfunction.
• The LCD monitor may flicker for a few seconds after the power is turned on. This is an
operation to correct flicker caused by lighting such as fluorescent lights, LED lights, etc. and is
not a malfunction.
• Is [LCD Mode] active? (P53)
• Perform [LCD Display]. (P52)
• This is not a malfunction.
These pixels do not affect the recorded pictures.
• In dark places, noise may appear to maintain the brightness of the LCD monitor. This does not
affect the pictures you are recording.
• Is the flash setting set to [Œ]?
> Change the flash setting. (P65)
• The flash cannot be used in the following cases:
– When using Auto Bracket (P71)
– In Miniature Effect Mode (P77)
– [Scenery]/[Panorama Shot]/[Night Scenery]/[Handheld Night Shot]/[Sunset]/[Glass Through]
in Scene Mode
(P78)
– In 3D Photo Mode (P85)
– When recording in [Burst] (except for [ ]) (P103)
• The flash is activated twice when Red-Eye Reduction (P65) has been set.
• Has [Burst] (P103) in the [Rec] menu been set to [ ]?
LCD monitor
The LCD monitor becomes darker or brighter for a moment.
The LCD monitor flickers indoors.
The LCD monitor is too bright or dark.
Black, red, blue and green dots appear on the LCD monitor.
Noise appears on the LCD monitor.
Flash
The flash is not activated.
Flash is activated several times.