Panasonic AJ-D455P - Manual (Page 18)

18
Setup menus
The contents of the USER2 – USER5 files can be copied (loaded) into the USER1 file. In
addition, the contents of the USER1 file can be copied (saved) to the USER2 – USER5 files.
USER1 USER2
USER3
USER4
USER5
Settings can be locked.
Settings can be locked.
Settings can be locked.
Settings can be locked.
Load or save
Load or save
Load or save
Load or save
Loading a user file
1
Press the MENU button.
2
While holding down the FILE button, press the or button, and select USER1.
3
Press the or button and move the cursor (
∗
) on the menu screen to setup item
No. A00 (LOAD).
SETUP-MENU MENU
<USER1> NO.A00 - 0000
725 CUE SLOW STEP
∗
A00 LOAD USER2
A01 SAVE USER2
A02 P.ON LOAD OFF
END
4
Press the or button and select the user file whose contents are to be loaded into
USER1.
5
Press the SET button. The following messages appear on the menu screen and
counter display.
Menu screen Counter display
L U2 -U1
SETUP-MENU LOAD
USER2
→
USER1 OK?
YES<PLAY>/NO<STOP>
The user file number selected in step 4 is displayed in the shaded area.
6
Press the PLAY button. The settings of the user file selected in step 4 are loaded, and
the USER1 menu display appears. When the STOP button is pressed, the USER1
menu display appears while the settings remain unchanged.
7
Press the or button and move the cursor (
∗
) on the menu screen to any setup
item except No. A00 (LOAD) and No. A01 (SAVE).
8
Press the SET button. The USER1 settings are now stored in the memory.
If the USER1 settings are not going to be stored in the memory, do not press the SET
button but press the MENU button.