Panasonic AJ-D455P - Manual (Page 22)

22
Setup menus
USER menu
<BASIC>
Item Setting
No.
Superimposed
No.
Superimposed Description
display display
000 P-ROLL 0000 0S
. .
. .
TIME . .
0005 5S
. .
. .
. .
0015 15S
001 CHARA 0000 0
. .
. .
H-POS . .
0004 4
. .
. .
. .
0016 16
002 CHARA 0000 0
. .
. .
V-POS . .
0018 18
. .
. .
. .
0022 22
003 DISPLAY 0000 TIME
SEL 0001 T&STA
0002 T&S&M
0003 T&RT
0004 T&YMD
0005 T&MDY
0006 T&DMY
004 LOCAL 0000 DIS
ENA 0001 ST&EJ
0002 ENA
The underline on the setting item denotes the initial setting.
This sets the preroll time which can be set from 0 to 15 seconds
in 1-second increments.
<Note>
The unit will not operate if the preroll time is set to 0 seconds
when the unit is set to automatic editing (PREVIEW, AUTO
EDIT COMMAND) from an external controller.
This sets the position of the characters on the horizontal plane
for the time code and other super displays output to the
VIDEO OUT 3/SERIAL OUT 3* connector.
<Note>
When setting this item, the DISPLAY SEL status is output to
VIDEO OUT 3/SERIAL OUT 3* even if SUPER OFF has been
set. However, when the menu is exited, operation complies
with the SUPER OFF/ON setting.
Also, CHARA TYPE is output to VIDEO OUT 3/SERIAL OUT 3*
according to the status set in the menu.
This sets the position of the characters on the vertical plane
for the time code and other super displays output to the
VIDEO OUT 3/SERIAL OUT 3* connector.
<Notes>
1. When setting this item, the DISPLAY SEL status is output
to VIDEO OUT 3/SERIAL OUT 3* even if SUPER OFF has
been set. However, when the menu is exited, operation
complies with the SUPER OFF/ON setting.
Also, CHARA TYPE is output to VIDEO OUT 3/SERIAL
OUT 3* according to the status set in the menu.
2. When the DISPLAY SEL setting causes characters to
extend beyond the edges of the screen, the setting value is
changed so that the characters are automatically displayed
in a position on the screen.
For selecting the time code and/or other information which is to
be shown on the superimposed display at the VIDEO OUT 3/
SERIAL OUT 3* connector.
0: Time only
1: Time and operation mode
2: Time, operation mode and mode
3: Time and REC TIME
4: Time and REC DATE (year/month/day)
5: Time and REC DATE (month/day/year)
6: Time and REC DATE (day/month/year)
<Notes>
1. The mode display is DVCPRO during DVCPRO playback,
DV during DV playback, and DVCAM during DVCAM
playback.
2. When 2 (T&S&M) is set, an error message will appear
when a warning or error has occurred.
3. REC TIME and REC DATE are displayed during DV or
DVCAM playback only. The operation mode is displayed
during DVCPRO playback.
This selects the buttons which can be operated on the front
panel when the REMOTE/LOCAL switch has been set to
REMOTE.
0: No buttons can be operated.
1: Only the STOP and EJECT buttons can be operated.
2: All buttons can be operated.
* The SERIAL OUT 3 con-
nector functions only
when the AJ-YA455P
serial interface board
(optional accessory) is
used.