Panasonic AJ-D455P - Manual (Page 30)

30
Setup menus
USER menu
<TAPE PROTECT>
Item Setting
No.
Superimposed
No.
Superimposed Description
display display
400 STILL 0000 0.5s
TIMER 0001 5s
0002 10s
0003 20s
0004 30s
0005 40s
0006 50s
0007 1min
0008 2min
401 SRC 0000 STEP
PROTECT 0001 HALF
402 DRUM 0000 OFF
STDBY 0001 ON
403 STOP 0000 STEP
PROTECT 0001 HALF
404 DV STILL 0000 0.5s
TMR 0001 5s
0002 10s
0003 20s
The underline on the setting item denotes the initial setting.
<Note>
In order to protect the tape and VTR helical heads, it is recommended that the Still Timer be
set for automatic tape protection mode in 20 seconds or under.
This selects the length of time until tape protection mode is
established when a DVCPRO tape is inserted and the unit is
in STOP or STILL mode.
(Unit: s = second, min = minute)
This selects the operation during the tape protection mode
when the unit is left standing in the still status.
0: STEP FWD.
1: HALF LOADING.
<Note>
When STEP FWD is selected, operation will be automatically
transferred to the standby OFF (half loading) mode as soon as
the unit has been left standing in the STILL mode for a total of
30 minutes (or 1 minute for DV/DVCAM cassette).
This selects the drum operation in the STANDBY OFF mode.
0: The drum stops rotating.
1: The drum continues rotating.
This selects the operation in the tape protection mode when
the unit has been left standing in the STOP mode.
0: STEP FWD
1: HALF LOADING
<Note>
When STEP FWD is selected, operation will be automatically
transferred to the standby OFF (half loading) mode as soon as
the unit has been left standing in the STOP mode for a total of
30 minutes (or 1 minute for DV/DVCAM cassette).
This selects the length of time until tape protection mode is
established when a DV/DVCAM tape is inserted and the unit
is in STOP or STILL mode.
(Unit: s = second)
<Note>
When using the unit in tempuratures below 59
°
F (15
°
C), set
this item to 10 seconds to protect the tape and video heads.