Pioneer SCSI-2 - Manual (Page 139)

CD-ROM SCSI-2 COMMAND REFERENCE MANUAL VERSION 3.1 (OB-U0077C)
- 126 -
Table 2-31C Supported additional sense codes and additional sense code qualifiers (continued)
ASC ASCQ DESCRIPTION
21 00 logical block address out of range
24 00 invalid field in CDB
25 00 logical unit not supported
26 00 invalid field in parameter list
26 01 parameter not supported
26 02 parameter value invalid
26 03 threshold parameters not supported
28 00 not ready to ready transition (medium may have changed)
29 00 power on, reset or bus device reset occurred
2A 00 parameters changed
2A 01 mode parameters changed
2A 02 log parameters changed
2B 00 copy can not execute since host can not disconnect
2C 00 command sequence error
2F 00 commands cleared by another initiator
30 00 incompatible medium installed
30 01 can not read medium - unknown format
30 02 can not read medium - incompatible format
37 00 rounded parameter
39 00 saving parameters not supported
3A 00 medium not present
3D 00 invalid bits in identify message
3E 00 logical unit has not self-configured yet
3F 00 target operating conditions have changed
3F 01 micro code has been changed
3F 02 changed operation definition
3F 03 inquiry data has changed
40 00 diagnostic failure on component NN (80h-FFh)
43 00 message error
44 00 internal target failure
45 00 select or reselect failure
46 00 unsuccessful soft reset
47 00 SCSI parity error
48 00 initiator detected error message received
49 00 invalid message error
4A 00 command phase error
4B 00 data phase error
4C 00 logical unit failed self configuration
4E 00 overlapped commands attempted
53 00 media load or eject failed
53 02 medium removal prevented
57 00 unable to recover TOC
5A 00 operation request or state change input (unspecified)
5A 01 operator medium removal request
5B 00 log exception
5B 01 threshold condition met
5B 02 log counter at maximum
5B 03 log list codes exhausted
63 00 end of user area encountered on this track
64 00 illegal mode for this track