Pioneer SCSI-2 - Manual (Page 53)

CD-ROM SCSI-2 COMMAND REFERENCE MANUAL VERSION 3.1 (OB-U0077C)
- 40 -
T ABLE 2-9-1B E RROR R ECOVERY D ESCRIPTIONS
Value Description
00h
The maximum error recovery procedures available are used. If an error occurs which
is uncorrectable with the error correction codes (ECC) on the media, data transfer is
terminated with Check Condition status. The block with the error is not transferred.
The sense key is set to Medium Error. The information bytes give the address of the
block where the unrecovered error was detected. Recovered errors are not reported.
01h
Only retries of the read operation and CIRC are used (layered error correction is not
used). Only CIRC unrecovered data errors are reported. If a CIRC unrecovered data
error occurs, data transfer is terminated with Check Condition status. The block with
the error is not transferred. The sense key is set to Medium Error. The information
bytes give the address of the block where the unrecovered error was detected.
Recovered errors are not reported.
04h
The maximum error recovery procedures available are used. Recovered data errors
are reported. If a recovered data error occurs, data transfer is not terminated.
However, when the data transfer has completed Check Condition status is reported.
The sense key is set to Recovered Error. The information bytes give the address of
the last block where a recovered data error was detected. If a data error occurs which
is uncorrectable with the ECC information available on the media, data transfer is
terminated and Check Condition status is reported. The block with the error is not
transferred. The sense key is set to Medium Error. The information bytes give the
address of the block where the uncorrectable error was detected.
05h
Only retries of the read operation and CIRC are used (layer error correction is not
used). Recovered data errors are reported. If a recovered data error occurs, data
transfer is not terminated. However, when the data transfer has completed Check
Condition status is reported. The sense key is set to Recovered Error. The information
bytes five the address of the last block where a CIRC recovered data error was
detected. If an unrecovered data error occurs data transfer is terminated and Check
Condition status is reported. The block with the error is not transferred. The sense key
is set to Medium Error. the information bytes give the address of the block where the
unrecovered error was detected.
06h
The maximum error recovery procedures are sued. Recovered data errors are
reported. If a recovered data error occurs data transfer is terminated and Check
Condition status is reported. The block with the recovered error is not transferred.
The sense key is set to Recovered Error. the information bytes give the address of the
block where the recovered data was detected. if a data error occurs which is
uncorrectable with the ECC information on the medium, data transfer is terminated
with Check Condition status. The block with the error is not transferred. The sense
key is set to Medium Error. The information bytes give the address of the block
where the uncorrectable error was detected.
07h
Only retries of the read operation are used (layer error correction is not used). CIRC
recovered data errors are reported. If a CIRC recovered data error occurs, data
transfer is terminated with Check Condition status. The block with the recovered
error is not transferred. The sense key is set to Recovered Error. The information
bytes five the address of the block where the recovered data error was detected. If a
CIRC unrecovered data error occurs, data transfer is terminated with Check
Condition status. The block with the error is not transferred. The sense key is set to
Medium Error. The information bytes give the address of the block where the
unrecovered error was detected.
continued on next page