Pioneer SCSI-2 User Manual

Page 86

Advertising
background image

Play Audio Track Index

- 73 -

2.14

Play Audio Track Index (48h)

Operation Code is (48h).

Starting Track/Index

The starting track field specifies the track number of the starting audio track. The starting

index field specifies the index number within the track at which the audio play operation

shall begin.

Ending Track/Index

The ending track field specifies the track number of the ending audio track. The ending

index field specifies the index number within the track after which the audio play operation

shall stop. The audio play operation shall terminate at the last block with an index number

equal to the ending index. All contiguous audio sectors between the starting and ending

address shall be played.

The PLAY AUDIO TRACK INDEX command requests the drive begin an audio play operation.

The command function (Immed) and the output of audio signals shall be specified by the settings

of the mode parameters page code 0Eh.

If the starting address is less than the ending address, the command will be terminated with

Check Condition sense key set to ILLEGAL REQUEST.

If the starting address is not found, or if the address is not within an audio track, or if a not ready

condition exists, the command shall be terminated with Check Condition status. Valid values for

the track and index fields are 1 to 99.

If the ending track is greater than the last information track on the media, the playback will

continue until the last track is complete. If the ending index is greater than the largest index value

on the ending track, the playback shall continue until this track is complete then terminate.

These conditions are not considered errors.

If the starting index is greater than the largest index value on the starting track, and the stop on

track crossing (SOTC) bit of the audio control MODE SELECT parameters page code 0Eh is

zero, the playback operation will start at the beginning of the next track.

If the starting index is greater than the largest index value on the starting track, and the stop on

track crossing (SOTC) bit of the audio control MODE SELECT parameters page is one, the

playback shall not begin. The target shall return Check Condition, and the sense key set to

ILLEGAL REQUEST.

Advertising