Pioneer SCSI-2 - Manual (Page 66)

CD-ROM Audio Control Parameters
- 53 -
2.9.6 CD-ROM Audio Control Parameters
Immed (Immediate)
An Immediate, Immed ,bit of one indicates the target will send completion status as
soon as the playback operation has been started. An Immed bit of zero indicates that
the drive will not send completion status until the audio playback operation is
completed or an error occurs.
SOTC (Stop On Track Crossing)
A stop on track crossing, SOTC, bit of zero indicates the drive will terminate the
audio playback operation when the transfer length is satisfied. A stop on track
crossing bit of one indicates that the drive will terminate audio playback when the
beginning of a following track is encountered.
Out Port Channel Select
Refer to Table 2-9-6A on the opposite page for out port channel select options.
Output Port Volume
The channel volume control indicates the relative volume level for this audio port.
A value of zero indicates the output is muted, a value of FFh indicates the
maximum level. The output volume is defined by averaging port 0 and port 1.
The CD-ROM audio control parameter page sets the playback modes and output
controls of subsequent Play Audio commands and any current audio playback
operation.