Peavey X-VCA - Manual (Page 119)

p. 119
VCA copy
It is possible to copy a VCA assignment from one Scene location to another. Copies can be
made between Scene-0 and any Sequenced Scene, or a copy can be performed from a
Sequenced Scene to Scene-0,or between two Sequenced Scenes.The Copy function is a one-
shot only process, multiple Paste operations cannot be performed.A VCA Copy can only be
performed while the Console is in Edit VCA Master Mode.Although you can only edit one
Master at a time, the Copy function copies ALL VCA assignment data in that Scene, not just
the Master you happen to be editing. Follow these steps to perform a VCA Copy:
1. Enter VCA Edit Mode by briefly pressing one of the 8 Edit VCA Master switches
2. It will begin to blink and the Console will enter VCA Edit Mode
3. If the VFS switch is UP, you will be editing Scene-0 data. If Down (lit), the display
will indicate which Seq Scene you are currently on.You can move between Scene-
0 and the Seq Scenes by using the VFS switch.
4. If you wish to copy from a Sequenced Scene, press the VFS switch down.
5. Use the Scroll buttons to move to the Scene number you wish to Copy FROM
6. Press the Edit Preview (Copy) button on the Micro Control Panel
7. It will begin to blink indicating that the Scene data has been copied to a buffer
8.The NEXT button will light up.This is the Paste button for this procedure
9. Use the Scroll buttons to move to the Scene you wish to Copy TO, or release
the VFS switch if you wish to paste the data into Scene-0.
10. Press the NEXT (Paste) button to complete the operation.The current Scene
data is replaced by the copied data.
11.The Edit Preview and NEXT switches turned off after the Paste operation, to
perform another Copy, go to Step 3
12. If you wish to abort a Copy operation, re-press the blinking Edit Preview (Copy)
button. It will turn off along with the NEXT button.
13. Re-press the original (now blinking) Edit VCA Master switch to de-select it and
return to Normal Operate Mode.
7 vca facilities