Peavey X-VCA - Manual (Page 23)

p. 23
mono input module
When VCA faders
become dirty or worn,
they do not become noisy
because there's no audio
going through them.
+
1
features
input fader
The input fader is the primary level control for signals being sent to any of the
consoles mix buses.The signals affected are the AUX sends selected to be pre-
fader.The fader offers greater than 80dB of attenuation and up to 10dB of boost .
Normal operation is between -10 and 0.
The fader itself is a 100mm 10K linear taper slide potentiometer. It controls the
voltage to the channel's VCA. No audio passes through the fader.
solo switch
Pressing this momentary switch will include (illuminate) or exclude (not-illu-
minated) the channel from the consoles solo system.
See SOLO / VCA Edit switch section.