Status – Phonetics 1108 User Manual
Page 79
Chapter 5: Alarm Programming
67
The Model 1108 is able to suppress and then reset its dial-out
function automatically through use of the Status Report. This is
especially convenient when an alert condition is created upon
exiting a monitored door and there is no way to cancel from the
local keypad.
Example: You are planning to exit through a monitored door.
Prior to exiting, you initiate a Status Report recitation at the
Model 1108 keypad by pressing WHAT IS, followed by
STATUS, (key sequence shown below). You have approxi-
mately 30 seconds to exit without activating the Model 1108’s
programmed alarm response. At the conclusion of the Status
Report, normal alarm response is reactivated.
To use exit delay, initiate the Status Report.
1.
Press WHAT IS.
WHAT
IS
*
2.
Press STATUS. The Model 1108 recites the full Status
Report; during this time, you are able to exit the
monitored area without tripping an alarm.
STATUS
CONFIGURE