Phonetics 1108 - Manual (Page 95)

Chapter 7: Operation
83
same line as the Model 1108 (and TAD
is enabled), the Model 1108 will
answer on the first ring. First, it recites
the Status Report, followed by:
“Warning message received by telephone
number...(the number of your present location).”
“Have a good day.”
When the Model 1108 hangs up, the
alarm is acknowledged and dial-out
stops.
• If calls remain unanswered, or if they
are received by an answering machine
or FAX, the Model 1108 continues the
dialout sequence; it waits the Intercall
Time and proceeds to dial the next
telephone number. Telephone numbers
are dialed sequentially, and this cycle
continues for the number of Max Calls
programmed. If no acknowledgment
occurs, then at the completion of Max
Calls, the alarm is automatically
acknowledged and the dial-out process
is terminated.
Max Calls
Acknowledgment
Tone or Pulse
Callback
Acknowledgment:
TAD Enabled
IV. The Alarm is Acknowledged Variable Factors
NOTE
Acknowledging the alarm does not correct the
situation! The alarm condition will still exist until
the sensor is restored to its normal state.