Phonetics 1108 - Manual (Page 86)

Sensaphone ® Model 1108 User’s Manual
74
6.2.3 Example: Status Report, Disabled Inputs
If an input is disabled, the dial-out feature for that input is
deactivated, but all other programmed parameters remain in
effect. In the example below, all 8 inputs are disabled, although
inputs 5 and 6 are detecting alarms. AC power and Sound Level
are also disabled for dial-out. (Note that to indicate disabled
status, only AC power will return two audible beeps, rather
than the word, “OFF.”) When you call the Model 1108 for a
Status Report, you hear the following:
“Hello, this is telephone number 555-1234.
“The time is 12:15 PM.”
“Number 1, OFF, OK.”
“Number 2, OFF, 74 degrees, OK.”
“Number 3, OFF, OK.”
“Number 4, OFF, OK.”
“Number 5, OFF, 96 degrees, HIGH.”
“Number 6, OFF, EXISTS.”
“Number 7, OFF, 86 degrees, OK.”
“Number 8, OFF, 70 degrees, OK.”
“The electricity is (beep, beep), ON.” If the electricity is off,
or the AC adaptor is disconnected, you will hear:
“The electricity is (beep, beep), OFF.”
“Battery condition, OK.”
“Sound level, OFF, OK.” If the sound level is high you will
hear: “Sound level, OFF, HIGH.”
“Listen to the sound level for 10 seconds.”
The Status Report repeats once more and the Model 1108
concludes the call, saying: “Have a good day.”