Printronix H-SERIES P7000 - Manual (Page 107)

Page Format Submenu
107
RBN Low Action
This menu determines how the printer behaves once a ribbon low condition is
reached.
• Warn & Continue (default). Once a ribbon low condition is reached the
printer beeps and displays the "RIBBON UNDER XX% / Change RBN
Soon" warning message. Printing will continue without interruption. The
warning message can be cleared by pressing the ONLINE/Clear button,
however the message will persist again in two minutes. This action will
continue until a ribbon out (ribbon life reaches 0%) condition occurs.
• Warn & Pause. This setting is similar to the Warn & Continue selection
with one exception. When a ribbon low condition is reached the printer will
still display the "RIBBON UNDER XX%/Change RBN Soon" warning
message, however the printer will stop printing. This is meant to get the
user’s attention. To resume printing the user must press the ONLINE/
Clear key.
NOTE: Printing will only stop on the first occurrence of a ribbon low condition.
Once the user clears the warning message, subsequent warnings will
display the warning message but printing will continue.
DIAGNOSTICS
DIAGNOSTICS
(from page 50)
Printer
Tests
Shift Recycle*
All E’s
E’s + TOF
All H’s
All Underlines
All Black
Shuttle Slow
Shuttle Fast
Shuttle Only
Phase Printer
Paperout Adj.
Burnin Test
Print Error Log
Clear Error Log
Adapter Test
1
Ethernet Test 1
Acoustics
Dice 5
Prnt Ribbon Log
Full Width*
80 col. 76 dots*
(40-112) 32 Megabytes On: 127.7 Hrs.
Print: 8.3 Hrs
Print Strokes:
1370097
Print Lines:
106441
11 inch Pages:
4265
* = Factory Default
1 If installed
Test Width Paper Out
Dots
System
Memory
Print
Statistics
DIAGNOSTICS