Paper specifications – Printronix H-SERIES P7000 User Manual
Page 166
166
Appendix A
Paper Specifications
Paper Specifications
Labels
Type:
Edge-perforated, fan-fold, 3 to 17 inches (7.62 to 43.18 cm) wide, 2 to 12
inches (5.08 to
30.48 cm) long. SureStak Power Stacker option works with forms 5 to 12
inches (12.7 to
30.48 cm) long and up to 16 inches (41 cm) wide without the paper tent or 15.5
inches
(39.5 cm) wide with the paper tent installed.
Thickness:
Single-part: 15 to 100 pound (6.80 to 45.36 kg) stock; Multi-part: 1- to 6-part
forms (maximum 12 lb [5.44 kg] ply of upper plies)
Sheet Thick-
ness:
0.025 inch (0.064 cm) maximum
Drive:
Adjustable tractors (6-pin engagement)
On Backing:
One-part continuous perforated fanfold back form. Labels must be placed at
least 1/6 inch (0.42 cm) from the fan-fold perforation. Backing adhesive must
not be squeezed out during printing.
Sheet Size:
3 to 17 inches (7.62 to 43.18 cm) wide, including the two standard perforated
tractor feed strips. A maximum sheet length of 16 inches (40.64 cm) between
top and bottom perforations. Power Paper Stacker option is 5 to 12 inches
(12.7 to 30.48 cm) long.
Thickness:
Not to exceed 0.025 inch (0.064 cm) (including backing sheet)