Printronix P9000 Series - Manual (Page 14)

Overview 1-2
n Built-in Diagnostic Self-Tests
n RibbonMindert Feature
n Configuration Printout
n Data Stream Hex Code Printout
n Resident Serial and Parallel Interfaces
n Downloadable Character Sets
n Downloadable Languages
Two separate graphics capabilities are included in the printer: standard P-Series odd-even
dot Plot Mode graphics and Bit Image graphics. Intelligent graphics capabilities are available
by using the Printronix Intelligent Graphics Processor (IGP) options.
Serial Matrix compatibility extends printer versatility, enabling it to be used with a wide variety
of applications software. You may select industry standard Printronix P-Series or Serial Matrix
compatibility (similar to the IBM Graphic Printer emulation) from the control panel.
The programmable Vertical Format Unit provides rapid paper advance to specified lines for
printing repetitive and continuous forms. A variety of VFUs are standard in the P9012 to meet
application requirements.
International languages can be selected and downloaded, and custom characters can be
created. International languages and custom characters can be added to replace existing fonts
stored in the Character Library and are accessible in P-Series and Serial Matrix printer protoĆ
col.
The RibbonMindert feature monitors ink consumption and alerts the operator when the ribĆ
bon should be changed before print quality falls below an acceptable level.
Optional Features
The P9012 printer capability and versatility can be enhanced with the options listed below. For
more information, contact an authorized Printronix representative.
D Intelligent Graphics Processor (IGP) - Allows you to create and store forms, generĆ
ate logos, bar codes, expanded characters, and other graphics. Forms can be created
with a variety of graphic components and overlayed with alphanumeric and bar code
data in a single pass. Available as a factory-installed or field-installed option.
D Dataproducts Adapter Cable - Accepts the 50-pin Winchester connector and conĆ
nects into the 50-pin Subminiature D connector on the rear of the printer.
D Cleaning Kit - Provides a vacuum attachment, a cleaning brush and instructions for
cleaning the print-head and shuttle area.
D Dataproducts Long Lines Interface - Allows the maximum cable length to be exĆ
tended to 500 feet (150 meters).
D Maintenance Manual - Covers Theory of Operation, Cleaning, Corrective MainteĆ
nance, Troubleshooting, and Illustrated Parts Breakdown.
D RibbonPlust - Provides a full ribbon maintenance system which constantly repleĆ
nishes the ink supply. Available as a factory-installed or field-installed option.