Printronix P9000 Series - Manual (Page 304)

Appendix C-4
Interfaces
Type Resident parallel and serial
Logic Levels TTL/RS-232
Data Format ASCII
Compatibility Centronics, Dataproducts, RS-232C
Buffer Size 512, 1024, or 2048 characters
Forms
Paper
Type Edge-perforated, fanfold, 3 to 16 inches wide
Thickness Single-part - 15 to 100 pound stock
Multi-part - 1- to 6-part forms
Sheet Thickness 0.025 inches maximum
Drive Adjustable tractors (8-pin engagement)
Slew Rate 20 inches-per-second maximum
Labels
On Backing One-part continuous perforated fanfold back form.
Labels must be placed at least !/6 inch from the
fanfold perforation. Backing adhesive must not be
squeezed out during printing.
Sheet Size 3- to 16-inches wide, including the two standard
perforated tractor feed strips. A maximum sheet size
of 12 inches between top and bottom perforations.
Thickness Not to exceed 0.025-inch (including backing sheet).
Forms Control
Skip-Over Perforation 1, !/2, @/3, %/6 inch; Control Panel Selectable
Vertical Format Units (VFU)
IBM Serial Matrix Vertical Tabs
P-Series: EVFU
Dataproducts Direct Access (DVFU)
Direct Access (NVFU)
Centronics Direct Access (CVFU)
Miscellaneous
Ribbon
Standard Printronix P/N 102247