Printronix P9000 Series User Manual
Page 324
Advertising
Appendix
F-2
Side Panel Removal
To remove the right side panel to access the card cage, perform the following instructions and
refer to Figure F-1.
1.
Disconnect the AC power source.
2.
Raise the printer cover.
3.
Loosen (but do not remove) the captive screws (A), one at a time, from the upper corners
of the side panel (B) until the side panel pulls away from the cabinet.
4.
Using both hands, lift the side panel up and off the mounting studs (C) at the bottom of
the printer side panel.
Figure F-1. Side Panel Removal
Advertising