Panasonic DP-3510 - Manual (Page 119)

119
Troubleshooting
Before Calling Service
Check Action
Unit Does Not Operate
Does the display light?
Check if the Power Switches (Main Power
Switch on the back and Power Switch on the
Left Side of the machine) are turned ON and if
the power cord is plugged into the AC outlet.
Does the Energy Saver key flash (or light)
and displays are turned OFF?
(See page 56)
Press Energy Saver key on the control
panel.
Perform actions in accordance with each
message.
Does any of the U## codes and messages
appear on the display?
(U1, U4, U6, U7, U9....etc.,)
Add Staples
(DA-FS600/FS605 : See page 85)
(DA-FS330
: See page 90)
(DA-FS355 : See page 94)
Remove all jammed staples.
(DA-FS600/FS605 : See page 87)
(DA-FS330
: See page 91)
(DA-FS355 : See page 95)
Does the Add Staples indicator and
message appear on the display?
Add paper. (See page 105)
Remove the misfed paper. (See page 108)
Does the paper misfeed indicator and
message appear on the display? (I)
Turn the Main Power Switch on the Back
and the Power Switch on the Left Side of
the machine to the OFF position, then back
ON again. If the error code does not clear,
call your Service provider.
Does E#-## indicator and message appear
on the display?
Does the Add Paper indicator and
message appear on the display? (J)
Other
s
Turn the Power Switch Off/On.
The machine would not accept the next job
during operation, instructed job would not
be accepted for long time period or job
would not be completed.
Light Copies
Does the exposure indicator say
“LIGHTER”?
Touch the “DARKER” button.
Does the Add Toner indicator and message
appear on the display? (?) Replace the Toner Bottle.
(See page 107)
P119_dp4510(pb).P65 7/31/02, 10:51 AM 119