Panasonic DP-3510 User Manual
Page 20
20
B4·FLS
NOTE
Tandem/Remote Copying
■
■
■
■
■
(Required installation of optional Hard Disk Drive/DA-HD60, network
setup(See page 65)and registration of parameter of the user machine(See
page 21).)
C 50 % of the total copying set(s) are split between other copiers on the network. (Tandem Copying)
C All of the copying sets will be printed on other copiers in the network. (Remote Copying)
1
Place the
Original(s)
Basic Menu
(
2
)
COPY SIZE
(Reduction/
Enlargement
Only)
4
Set Tandem/Remote
Copying
3
Number
of Copies
5
Press
START
# Select TANDEM/REMOTE button on
BASIC MENU.
C The selected Remote printing copier, must be either DP-6010, DP-4510 or
DP-3510. For the copier to function as a Remote/Tandem Copier it has to be
setup in advance.
C To reset the Remote/Tandem mode, press the CANCEL button.
$ Select Station.
If the desired Station(Machine Name) is
not displayed for selection, register the
Station(Machine Name) according to the
procedure on the next page.
% Select TANDEM button or REMOTE
button.
& Touch the OK button.
P020_4510(pb).p65
7/31/02, 10:44 AM
20