Panasonic DP-3510 - Manual (Page 57)

57
Making Copies
B4·FLS
NOTE
Other Features
Skyshot Mode
■ ■ ■ ■ ■ Skyshot allows copying a manuscript without generating dark borders
even if the platen cover or ADF is opened.
Skyshot mode eliminates dark borders around the originals, and is especially convenient for
copying small-sized originals like bank checks or documents with unusual shapes (round, oval,
etc.). These documents can be reproduced without generating any unnecessary black areas
simply by making a copy with the cover open.
Two types of Skyshot modes can be selected;
Digital Skyshot Mode : The scanning area (size) is not pre-determined.
Manual Skyshot Mode : The scanning area (size) is pre-registered into memory (M1 and M2) in
advance. (See page 72)
■ ■ ■ ■ ■ Digital Skyshot Mode
1
Place the Original on the platen
(Opening the Platen Cover/ADF)
3
Press START
# Press the FUNCTION Key.
$ Touch the COPIER SETTINGS button.
% Touch the [ button to advance to the 02/04 Display
Screen of Copier Settings menu.
& Touch the 06 Digital skyshot mode button.
( Select the desired function and touch the OK button.
06 Digital skyshot setting
No : None
Freeshp (Free shape) : Copy is made with slant.
Parallel
: Copy is made to parallel.
(within 5 degrees)
C An incorrect exposure may occur when there is a black line at the edge of
the original or an image which the copier interprets as a black pattern in the
skyshot mode.
C An incorrect position detection of the original may occur when a strong light
shines onto the glass during skyshot mode.
Select the Digital Skyshot Mode
The Digital Skyshot has been 2 modes ( or ).
The default setting of Digital Skyshot Mode is “None”.
Before using this mode, select each setting by using the Function setting.
( 2 )
copy copy
copy
copy
P056-057_4510(pb).p65 7/31/02, 10:45 AM 57