Panasonic DP-3510 - Manual (Page 17)

17
# Place the sheets of paper into
the tray. (Approximately up to
50 A4 size sheets/80
g g g g g/m 2 )
ATTENTION
Basic Menu
■ ■ ■ ■ ■
Using the Sheet Bypass
Copying on Special Paper, etc.
Open the Sheet Bypass. Pull out the Sheet Bypass Tray
until it stops.
Insert the paper until it stops.
$ Adjust the side guides.
Incorrect adjustment may cause the
paper to wrinkle, misfeed or skew.
C Do not feed curled paper through the sheet bypass to avoid misfeed.
C Certain types of transparency film may not be compatible and may damage
your machine. Consult with an authorised Panasonic dealer for advice
regarding non-standard paper types. (Panasonic has tested “3M PP2500”
transparency film and found it to be compatible.)
Making Copies
Do not load paper above the upper
limit arrow indicated on Side Guides.
Sheet Bypass
Inappropriate Originals
C Paper with a smooth surface such as glossy
and coated papers
CTransparencies
C Originals with a Lead Edge that is “creased”,
“folded”, “punched” or “glued”
C Paste-ups
C Pressure sensitive or carbon backed papers
C Paper with excessive curl
C Stapled originals
C Freshly printed copies from a laser printer
When copying the thick Booklet, open the ADF and check the ADF Hinge is returned to original
angle if ADF rear side is lifted up.
1 2
■ ■ ■ ■ ■
Notice for i-ADF
P016-017_4510(pb).p65 7/31/02, 10:44 AM 17