Panasonic DP-3510 - Manual (Page 52)

52
REGISTER *
# Touch each File Key then,
touch the REGISTER button.
$ Set the registered density.
% Press Start.
& Touch the OK button to
confirm registration.
( Input the file name by using
the QWERTY keyboard then
touch the OK button.
Refer to entering the station
name of the Network
Scanner. (See page 98)
B4·FLS
■
File Edit
There are three File Edit available in the Form Overlay function.
■ ■ ■ ■ ■
Procedure
Select INSERTION/
OVERLAY Mode
( 4 )
Press START
(Register)
1
Place the
Original
(Register)
2 3
Select File Edit
mode and
desired function
File Edit
Insertion/Overlay
ERASE
# Select the File Key to
erase.
$ Touch the ERASE button.
% Touch the OK button.
FILE NAME EDIT
# Select the File Key to edit.
$ Touch the FILE NAME EDIT
button.
% Change the file name by using
the QWERTY keyboard then
touch the OK button.
Refer to entering the station
name of the Network Scanner.
(See page 98)
& Touch the OK button.
∗
Up to 5 image files can be registered. If the selected File Key already contains a
registered file image, the new image will over-write the current image.
C Function to select the file is only available when the optional Hard Disk Drive
(DA-HD60) is installed.
NOTE
Register: To Add a new file Erase: To Erase a registered
file
Title Edit: To Change the title
of a file
File Key
P052-053_4510(pb).p65 7/31/02, 10:45 AM 52