Panasonic DP-3510 - Manual (Page 26)

26
NOTE
B4·FLS
■ ■ ■ ■ ■
Completion Notice
You or a selected party can be notified with a Job Completion Notice via a pop up screen on
your PC when the Copy Job is completed. You must set the Job Completion Notice feature prior
to starting the job and set up the Status Monitor.
The PC IP Addresses will be automatically displayed into the Address Book on your network
(contact your network administrator for detail).
1
Place the
Original(s)
2
Set function and
Completion Notice
3
Number
of Copies
4
Press START
Pop up
screen will be
shown on
your PC
Touch the COMPLETION NOTICE
button.
# Select the desired PC Address.
$ Touch the OK button.
C This Completion Notice is available only when connected to the network.
C To reset the Completion Notice, press the CANCEL button.
Completion Notice
Basic Menu
C Before using the Completion Notice, install the Panasonic-DMS included with the machine.
Then, set the Status Monitor as follows;
# Right click the Status Monitor
icon.
$ Select the Job Completion Notice
\ Pop up Display.
P026_4510(pb).p65 7/31/02, 10:44 AM 26