Panasonic DP-3510 - Manual (Page 74)

74
Printer Setting for Key Operator
NOTE
■ ■ ■ ■ ■ Input the Key Operator ID Code to change Settings
Screen
No.
Initial
Setting
Function
01/03
Sets the job completion time setting.
C 1~ 999 sec.
Sets print the error page.
C Off, On
180 sec.
On
Off Compress automatically then print out.
C Off, On
02/03
Sets the status page print of PS.
C Stop, Start
Sets the printer status print.
C Stop, Start
Sets the font list print of PCL.
C Stop, Start
∗
Functions except 0 and 11 are available when optional accessories are installed.
C It is necessary to input the Key Operator ID code before changing items on this page.
∗∗
When the No. 12 function is set, turn OFF and ON the Power Switch.
Function
Sets the font list of PS.
C Stop, Start
Sets the spool function.
C Off, On On
Prints text page only.
C Off, On On
Sets the automatic holding function of mailbox data.
C Infinity, 1 day, 2 days, 3 days, 4 days, 6 days, 7 days 7 days
03/03
Sets delete the mailbox data. *
C All, Before
Before
Sets authorisation to delete the print queue.
C Free, Key op. (operator) Key op.
06 Printer settings print
07 Font list print (PCL)
08 Font list print(PS)
09 Mailbox data holding
11 Print queue delete
10 Delete mailbox data
00 Job completion time
01 Page protection
02 Error page print
03 Spool function
04 Text print
05 PS Configuration print
Modes
12 EtherTalk Zone name Input a EtherTalk Zone name. **
C Maximum 32 charcters
P074-075_4510(pb).p65 7/31/02, 10:50 AM 74