Printek FORMSMASTER 8000SE - Manual (Page 121)

S P E C I F I C A T I O N S
113
Bottom tractor feed with pinch roller exit.
Straight paper path with zero waste tear off.
Paper width: 2.5 to 15 inches.
Paper Slew Rate: 16 inches per second.
Ribbon
23,000,000 character, mobius loop cartridge.
Special Forms Handling Features
Print up to six part forms (.025" maximum thickness).
Easy access to tractors.
Front panel and host form selection.
Automatic head gap.
Paper out sensing.
Paper motion sensing.
Paper edge sensing.
Page reprint.
Automatic path switching for same form in more than one path.
Nonvolatile memory for ten form setups. Parameters for each form include:
custom form name, tractor path (only in FormsMaster 8003se), automatic
forms cutting (only if FormsCutter is installed), cpi, left margin, right margin,
lpi, form length, top margin, bottom margin, font, character impact mode,
language*, slashed or nonslashed zero, and unidirectional printing.
Computer Interface
Parallel, serial, or optional LAN interface (if installed).
Centronics compatible Parallel.
Asynchronous RS-232: 110 to 9600 baud; Even, Odd, or No parity; 7 or
8 data bits; 1 or 2 stop bits; XON/XOFF, ETX/ACK, and Hardware
handshake.
Input Buffer Size: 32K bytes.