Printek FORMSMASTER 8000SE - Manual (Page 17)

G E T T I N G S T A R T E D
9
Ethernet 10/100BaseT
This interface uses a standard RJ-45 connector and the default printer
emulation is Epson. For a complete description of all the default settings for
this interface, refer to Parallel/LAN Interface Items on page 57. For
additional software installation and operational information, please refer to
the Troy XCD Quick Install Manual shipped with the unit
Wireless Ethernet Print Server
This interface is intended to be used for 802.11b wireless connectivity. It
may also be used with conventional CAT-5 twisted pair wiring, using the
standard RJ-45 connector. The interface automatically senses when a
CAT-5 connection is present and will disable the wireless capability.
For additional software installation and operational information, please refer
to the Printek Wireless Ethernet Print Server Manual shipped with the unit.