Printek FORMSMASTER 8000SE - Manual (Page 26)

G E T T I N G S T A R T E D
18
After the paper is placed in the tractor and the tractor door is closed,
position the tractor far enough to the right so that there is no buckle in
the paper between the tractors, but not so tight that the holes in the
paper are distorted. Lock the tractor in place by returning the lever
to the up position.
Loading the Center Tractors
7. Tilt the front tractors forward by pulling the green lever on the right
hand side of the front tractor assembly forward.
8. Repeat steps 4 through 6 above.
Front Tractors Tilted Forward for Access to Center Tractors
Loading the Rear Tractors
9. Tilt the center tractors forward by pulling the green lever on the
center tractor assembly forward.
10. Repeat steps 4 through 6 above.