Printek FORMSMASTER 8000SE - Manual (Page 73)

P R I N T E R C O N F I G U R A T I O N
65
Ribbon Check may also be turned off to allow the use of non-Printek brand
ribbons. Using non-Printek ribbons may limit the warranty on the print
head, so before turning Ribbon Check off, please read “Why Use Only
Printek® Brand Ribbons” on page 10 and the warranty information on page
114. Note that turning this feature off while still using Printek brand ribbons
will not affect the extended warranty.
Ribbon Life Ribbon Life
23 Million
Chars
Possible Values: 5 … 23* … 30 Million Chars
This item sets the number of “draft equivalent” characters to be printed
before the Change Ribbon message is displayed. “Draft equivalent” is
an indication of the average density, or number of dots, in a draft font
character. Characters printed using other fonts are weighted according to
their own density. Typically, fast draft characters have fewer dots while
letter quality and optical quality fonts have more and are weighted as fewer
or more draft characters accordingly. Graphics data are weighted
according to the actual number of dots printed.
ImagerPlus Graphic Card
OPTIONS MENU
ImagerPlus
The printer will automatically display ImagerPlus as shown above when the
interface is installed. The descriptions in this manual are brief. For more
information, please refer to the appropriate ImagerPlus manual.
Emulation Emulation
QMS CodeV v2
Possible Values: QMS CodeV v2*, PTX CodeV v2,
Printronix IGP