Printek FORMSMASTER 8000SE - Manual (Page 70)

P R I N T E R C O N F I G U R A T I O N
62
the page, Reprinting Page! will be displayed when the new form is
loaded (the previous partially printed page should probably be discarded).
If the printer is unable to reprint the page, the page will be broken,
Cannot Reprint - Page Too Large will be displayed, and
printing will resume where it left off as described in the next paragraph. The
printer’s ability to complete the reprint successfully depends on whether the
data for the current page is still in the printer’s memory. Refer to the
following Reprint Page Size option for more information regarding how
much data may be retained.
When Break Page is selected, the printer will stop printing and go off
line as soon as a paper out or paper jam condition is detected. After a new
box of forms is loaded, printing will resume where it left off. The Break
Page setting is appropriate when you know a page is too large to reprint
(exceeds available buffer size, e.g. contains large graphic images). This will
suppress the error message Cannot Reprint before printing
continues.
Character to Ignore Char. To
Ignore
255
Possible Values: 0, … 255*
This allows a single 8-bit character to be discarded as it is received. This is
useful when the host application is sending an unwanted control character,
for example. Values are in decimal, with printable characters displayed to
the left of the decimal value.
To use this feature:
1) Press the UP/DOWN ARROW keys to select the desired character
decimal value. Printable characters will appear to the left of the
number.
2) Press the ITEM button to display Ignore Character ON/Off, then the
UP/DOWN ARROW keys to turn the feature On or Off.