Printek FORMSMASTER 8000SE - Manual (Page 55)

P R I N T E R C O N F I G U R A T I O N
47
Possible Values: 1 … 66* … 227 Lines
This item sets the form length in lines at the current line pitch (LPI). For
example: for an eleven inch form, enter 66 if you are using six lines per inch
or 88 if you are using eight lines per inch.
Top Margin Top Margin
0 Lines
Possible Values: 0* … 226 Lines
This item sets the top margin in lines. Setting a top margin will reduce the
size of the printable area of the page by the number of lines set. Printing will
not be allowed above the top margin.
Note: In most cases changing where printing begins on a form should
be accomplished with ALIGN PRINT rather than with a top
margin. Adding a top margin may cause some programs to
print the first form correctly and then print following forms too
far down the page if the program sending the data does not
require the margin.
Bottom Margin Bottom Margin
0 Lines
Possible Values: 0* … 226 Lines
This item sets the bottom margin in lines. Setting a bottom margin will
reduce the size of the printable area of the page by the number of lines set.
When the bottom margin is reached, the remainder of the page will be
skipped and printing will resume at the beginning of the next page (or top
margin if one is set). Adding a bottom margin may cause some data to be
printed on the wrong page if the program sending the data does not require
the margin.
Characters Per Inch Characters/Inc
h
10