Printronix P5000LJ Series - Manual (Page 109)

IGP/VGL (Code V) Emulation
109
Free Format
• Disable. The default.
• Enable. Selects free format mode as the power-up default, and selects
the graphics mode ^PY as the power-up default. Free format causes the
Code V to ignore carriage returns, line feeds, and all characters below
hex 20 sent from the host.
Mgnum Conversion
• Disable. The default.
• Enable. Selects the graphics mode ^PY as the power-up default.
LPI
The number of lines to be printed per inch. For example, at 6 lpi there is 1/6
inch from the top of one print line to the top of the next print line.
Graphics Options
Following are several options which configure printing output:
Slashes in Zeros
This parameter allows you to print the numeral “0” with or without the slash.
This option applies to all character sets except OCR-A and OCR-B.
• Enable. Zero is printed with a slash.
• Disable. Zero is printed without a slash.
Ignore Dots
• Disable. The default.
• Enable. Causes the Code V to expect position values to be specified in
only 1/10ths of an inch. If the dot position is also given, it is treated as
text.
Append Rotated
• Disable. Logos and alphanumeric strings are treated as separate
elements.
• Enable. Appends logos to an alphanumeric string rotated in a clockwise,
counterclockwise, or inverted orientation.