Removing preferred file server – Printronix P5000LJ Series User Manual
Page 220
220
Chapter
12
Novell NIC Configuration (10/100Base-T)
Removing Preferred File Server
HTML Method
1.
Load a Web browser on a network station that can communicate with the
print server over TCP/IP.
2.
Direct your Web browser to URL:
http://P5000LJIPaddress/networkConf.html
(e.g.,
http://192.75.11.9/networkConf.html
)
3.
Look under the Novell section and remove the name of the preferred file
server from the File Server field.
4.
Click on the SUBMIT button when done and physically re-power the print
server to make the new settings take effect.
Manual (Telnet) Method
1.
Telnet to the print server. This will bring up a login screen:
telnet ipaddress
2.
You should now see a prompt displayed that has the NIC’s IP address
followed by a colon then
root.
ipaddress:root>
3.
At the prompt, enter:
store pserver novell fserver del fservername
where
fservername
is the name of the Novell file server you want to
remove as a preferred file server.
4.
Reset the unit to ensure the changes take effect.
reset
Note
If prompted for a User ID and password first, type in
root
for the ID and
press ENTER at the password prompt since there is no password by
default.
Note
If prompted for a User ID and password first, type in
root
for the ID and
press ENTER at the password prompt since there is no password by
default.