Printronix P5000LJ Series - Manual (Page 301)

301
B
Paper Specifications And
Forms Design
Introduction
P5000LJ Series printers use dot matrix line printing technology, which permits
a high degree of printing flexibility. Dot matrix technology enables the user to
print graphic images, line drawn characters, special characters, and multiple
alphabets.
The first section of this appendix lists general specifications for continuous
form paper. (Specific brands or types of paper are not recommended.)
Adherence to these specifications will ensure the best print quality and
reliable operation.
The second section goes into more detail, providing definitions, guidelines,
and a checklist to use for designing forms that will run smoothly through the
print station of the P5000LJ Series printer.
General Paper Specifications
This section describes the minimum paper specifications that must be met to
ensure the best printer performance.
Always test paper and forms before buying large quantities. Make all
measurements at 20
° to 26 ° Celsius (68 ° to 78 ° Fahrenheit) and 45% to 55%
relative humidity. P500LJ printers perform well with forms that meet the
specifications listed in Table 25 and Table 26 below.
Note Printronix conforms to ANSI® Standard X3.96-1983, “American National
Forms Information Systems for Continuous Business Forms,” and ISO
Recommendation No. 2784, which cover common form widths and depths,
standards for sprocket feed holes and margins, and other basic tolerances.