Printronix P5000LJ Series - Manual (Page 97)

Serial Matrix Emulation
97
Alt. Set 80-9F
• Control Code. Interprets data in the range of hex 80 through hex 9F as a
control code.
• Printable. Prints data in the range of hex 80 through hex 9F.
Serial Matrix Emulation
Control Code 06
Control Code 06 defines the function of ASCII code hex 06 (ACK). You can
select an alternate line spacing of 6, 8, or 10.3 LPI.
Define CR Code
This option controls the action of the printer when it receives a Carriage
Return code (hex 0D) from the host computer. If this feature is enabled, each
time the printer receives a Carriage Return, it inserts an additional Line Feed
code (hex 0A) into the data stream. Do not use this feature if the host
computer sends Line Feeds to the printer.
• CR = CR. Does not insert an extra Line Feed after each Carriage Return.
• CR = CR + LF. Inserts an extra Line Feed after each Carriage Return.
The next print position will be print position 1 of the next line.
Printer
Protocol
(from page 86)
Control Code
06
Define CR
Code
Auto LF Overstrike Define LF
Code
Printer
Select
Alt. Set
80-9F
Character
Set
Esc d
command
8.0 LPI*
10.3 LPI
6.0 LPI CR = CR*
CR = CR + LF Enable*
Disable Enable*
Disable LF = LF*
LF = CR + LF Disable*
Enable
Control Code*
Printable (see page 99) Even dot plot*
Double high
* = Factory Default
Serial
Matrix