Printronix P5000LJ Series - Manual (Page 174)

174
Chapter 8 HP e3000 / MPE-XL / MPE / iX: DTC Configuration
After successful Validation, run SYSGEN to cross-validate the DTS
configuration with the system configuration. In order for any TIO changes to
take effect, you must reboot the system.
Within SYSGEN
sysgen> io
io> LD
io> HO
sysgen> K . . . (Keep configuration)
Note Ensure that the P5000LJ Printer configuration matches the system baud
rate and parity.