Midline py (includes ^pn), Convert to u/c, Absorb after ^pn – Printronix P5000LJ Series User Manual
Page 111: Igp110 compatbl, Error handling
IGP/VGL (Code V) Emulation
111
Midline PY (includes ^PN)
•
Disable. The Graphics mode Enable command, ^PY, must be the first
three characters of a line.
•
Enable. The ^PY or ^PN can occur anywhere in a line.
Convert to U/C
•
Disable. Lowercase characters are printed normally.
•
Enable. All lowercase alphabetic characters are converted to uppercase.
Absorb After ^PN
•
Disable. All line terminators that immediately follow the ^PN command
are sent to the printer and processed.
•
Enable. All line terminators that immediately follow the ^PN command are
ignored.
IGP110 Compatbl.
This option instructs the Code V to behave similarly to the IGP-110 with
respect to certain commands. All new users with new applications should
select the Disable option. Selecting this mode insures the printer will behave
as described in this manual.
•
Disable. The IGP does not emulate the IGP-110 mode.
•
Enable. The IGP emulates the IGP-110 version.
Error Handling
Following are several options which define how errors are reported:
Error Msgs
•
Enable. Command syntax is checked and error messages printed when
command parameters are incorrect.
•
Disable. Error checking and error messages are suppressed.
Error Markers
•
Enable. Prints the following error markers for those elements that print
beyond the page boundaries:
>> for elements that begin off the right side of the page;
<< for elements that begin at the indicated position but end off the page;
♦
for elements where the starting position of the command contains an
error other than an off-page error.