Netware 3.x, Changing the print server name (nds & bindery) – Printronix P5000LJ Series User Manual
Page 223
Changing The Print Server Name (NDS & Bindery)
223
5.
Re-power the NIC by turning the printer off and on to make the changes
take effect.
Netware 3.x
1.
Enter
PCONSOLE
as supervisor on your Novell host.
2.
Select “Print Server Information” from the main menu and press ENTER.
3.
Select the print server you have been using for your PSERVER setup and
press ENTER. By default, this will be
M_xxxxxx
where
xxxxxx
equals
the last six digits of the print server’s Ethernet address found on the
bottom of the device (e.g.,
M_091C1A
).
4.
Select “Print Server Configuration” from the menu that displays.
5.
Select “Printer Configuration” from the next menu to display a list of
configured printers.
6.
Select the printer for which you wish to alter the poll time and press
ENTER.
7.
Change the “Sampling Interval” to the desired number (in seconds).
8.
Press ESCAPE and select “Yes” to save the changes to this new printer.
9.
Re-power the NIC by turning the printer off and on to make the changes
take effect.
Changing The Print Server Name (NDS & Bindery)
When defining a new print queue on a Novell file server, a new print server
must be defined to represent the NIC. This name must match the pre-defined
name given to the print server. By default, this name is in the format
M_xxxxxx
where
xxxxxx
equals the last six digits of the NIC’s Ethernet
address found on the bottom of the device
(e.g.,
M_091C1A
). You must make sure that the print server object that you
are using for your PSERVER setup has the same name as that stored on the
NIC. If you need to rename the print server object in Netware Administrator,
please delete the object and re-create it with the new name. Netware
administrator seems to have some problems with renaming objects.
Note
You may also want to change the “Service mode for forms” to “Change
forms as needed.” If you do not do this, the NIC will need to poll the file
server twice as much to get all the information it needs.
Note
You may also want to change the “Service mode for forms” to “Change
forms as needed.” If you do not do this, the NIC will need to poll the file
server twice as much to get all the information it needs.