Printronix P5000LJ Series - Manual (Page 274)

274
Chapter 15 RS-232 And RS-422 Serial Interfaces
RS-232 And RS-422 Serial Interface Configuration
By using the control panel, you can verify and change several interface
parameters in order to meet specific application requirements.
Refer to “Serial Submenu” on page 119 for RS-232 and RS-422 parameter
descriptions and information on selecting values for the following parameters:
RS-232 and RS-422
• Baud Rate (data rate selected from the operator panel)
• Data Bits (7 or 8 Bits)
• Stop Bits (1 or 2 Bits)
• Parity (None, Odd, Even, Mark or Sense)
RS-232 only
• Data Terminal Ready logic
• Request to Send logic
Some application programs require a unique configuration. If the printer is not
working properly with the configuration you selected, contact an authorized
Printronix representative.