Printronix P5000LJ Series - Manual (Page 70)

70
Chapter 3 Configuring NIC
Remote Shell
A TCP/IP command that helps configure print server settings remotely. A
TCP/IP host uses this command to remotely execute a single command on
the NIC.
Example:
rsh spike list prn
This command remotely executes the npsh command list prn on the NIC
named spike .
Configuration Using a Web Browser
NIC settings can be configured over TCP/IP through a standard Web browser.
The NIC Web pages provide a handy way to access some of the commands
built into the print server. You can access online help for all HTML pages.
To access the NIC home page:
1. Make sure the print server has an IP address and subnet mask so it is
recognizable on your TCP/IP network.
2. Make sure your network station can successfully ping the NIC over the
network.
3. Direct your Web browser to the Uniform Resource Locator (URL)
http://IPaddress (e.g., http://192.75.11.9 ). You will be
able to determine the exact state of the printer from the printer status
screen, as the shown in Figure 11.
Note If a router is used, make sure a gateway value is configured.