PowerTec OMRG25204 - Manual (Page 34)

Fuels, Lubricants, and Coolant
DX,ENOIL –19–13SEP06–2/2
DO NOT use diesel fuel with sulfur content greater than
1.00% (10 000 ppm).
DX,ENOIL6 –19–13SEP06–1/1
Extended Diesel Engine Oil Service Intervals
When John Deere PLUS-50

oil is used with the
specified John Deere filter, the service interval for
engine oil and filter changes may be increased by 50%
but not to exceed a maxium of 500 hours.
When ACEA E7, ACEA E6, ACEA E5, or ACEA E4
oils are used with specified John Deere filter, use
engine oil analysis to determine if the service interval
for engine oil and filter changes may be increased by a
maximum of 50% but not to exceed 500 hours.
If John Deere PLUS-50

, ACEA E7, ACEA E6, ACEA
E5, or ACEA E4 oils are used with other than the
specified John Deere filter, change the engine oil and
filter at the normal service interval.
If John Deere TORQ-GARD SUPREME

, API CJ-4,
API CI-4 PLUS, API CI-4, API CH-4, or ACEA E3 oils
are used, change the engine oil and filter at the normal
service interval.
If API CG-4, API CF-4, or ACEA E2 oils are used,
change the engine oil and filter at 50% of the normal
service interval.
PLUS-50 is a trademark of Deere & Company
TORQ-GARD SUPREME is a trademark of Deere & Company
DX,LUBMIX –19–18MAR96–1/1
Mixing of Lubricants
In general, avoid mixing different brands or types of oil.
Oil manufacturers blend additives in their oils to meet
certain specifications and performance requirements.
Mixing different oils can interfere with the proper
functioning of these additives and degrade lubricant
performance.
Consult your John Deere dealer to obtain specific
information and recommendations.
10-8
110306
PN=34