PowerTec OMRG25204 - Manual (Page 84)

Lubrication & Maintenance/500 Hour/12 Month
OURGP11,000000A –19–24JUN04–2/2
7. Align keys on filter element with slots in filter base.
8. Install retaining ring onto mounting base making certain
dust seal is in place on filter base. Hand tighten ring
(about 1/3 turn) until it “snaps” into the detent. DO
NOT overtighten retaining ring.
NOTE: The proper installation is indicated when a "click"
is heard and a release of the retaining ring is felt.
A plug is provided with the new element for
plugging the used element.
9. Open fuel shut-off valve and bleed the fuel system.
(See BLEEDING FUEL SYSTEM in Service As
Required Section.) Tighten bleed plug (D).
35-4
110306
PN=84