NEC 4650N - Manual (Page 101)

Replacing the Ozone Filter 95
MAINTAINING YOUR PRINTER
R EPLACING THE O ZONE F ILTER
Order Number 126164
The Ozone Filter needs to be replaced about every 12 months.
1. Slide open the Filter Cover located in back of the printer.
2. Take the used Ozone Filter from inside the Filter Cover
and discard it.
3. Fit the new Ozone Filter inside the Filter Cover and slide
it shut.
note: The Ozone Filter will produce an odor if not
replaced regularly.
R EPLACING THE T ONER C OLLECTOR
Order Number 20-213
The Toner Collector is a replaceable plastic bottle that collects
used toner. Follow these directions to change it:
1. Open the Front Cover of the printer.
2. Remove the used Toner Collector.
3. Note the label attached to the used Toner Collector.
Remove this label and use it to seal shut the opening.
4. Discard the used Toner Collector.
5. Install the new Toner Collector.